Getting Started

How to set up Imunify for AI agents from scratch — install the Sensor, sign into the Panel, and see your first event.

Imunify for AI agents protects a Linux host running an autonomous AI agent by intercepting every syscall the agent makes and evaluating it against a policy. To get up and running you install the Sensor on your host with a one-line curl | sudo bash command and sign into the Panel. The whole process takes about ten minutes.

Work through the three pages in this section in order:

1. Install the sensor — the prerequisites, the one-line install command, the kernel boot setting some Linux distributions need for LSM BPF, the optional Telegram link, and how to confirm the sensor is running and connected.
2. Your first event — what the sensor watches, what to expect the first time it catches something, and how the Panel unlocks your encrypted event content.
3. Tour the Panel — signing in, switching between sensors, the language selector, and what the Dashboard shows you.

If you do not have an install command yet, your Imunify operator issues one from the Panel.

Pages in this section

• Install the sensor — Prerequisites, the one-line install command, the optional Telegram link, and how to confirm your sensor is running and connected.
• Your first event — What the sensor watches, what to expect when it catches its first event, and how the Panel unlocks your encrypted event content.
• Tour the Panel — A short orientation to the Imunify Panel: how to switch between your sensors, how language and sign-in work, and what you see the first time you log in.